For small holes as much as approximately ½” you may simply use spackling compound and a putty knife. While drywall is sturdy, it may be punctured, chipped, or dented. Although this bead is damage-resistant, a sharp knock may cause the drywall compound that covers it to crack or chip off, and a robust enough shock can dent or bend the nook bead. The trick is to use compound for the second and third coats only on one aspect at a time.
You will discover setting-sort compounds wherever drywall taping provides are bought. Grab your 6″ drywall knife and apply your first coat. For example: Say that the hole seems to be 4 inches by 4 inches; minimize a new piece of drywall eight inches by 8 inches.
Picture 3: Fill the holes with joint compound, swiping first throughout the holes, then down. Small holes, typically caused by door knobs, screws and mice, may vary in measurement from just a few eighths of an inch to about 3 – four inches across.
(It is not essential to bolster the horizontal edges of the substitute drywall.) Secure the 2x4s to the drywall with drywall screws (picture 4). Set the brand new drywall …